CRYSIN® 5.0
Deep Pour 2 Part Resin
[CRYSIN® 5.0]
Crysin® 5.0 is a crystal-clear two-part epoxy resin
which can be poured at 5cm in each application.
It has low odor and zero VOC
and is ideal for large projects, making jewelries, or epoxy incorporated furniture.
Ratio for Crysin 5.0 is 3 (Resin): 1 (Hardner).
[Maximum Depth Per Pour]
The maximum depth of each application of Crysin® 5.0 is 5 cm.
If the temperature of working environment is over 28℃
or when working with a large project,
it is recommended to pour less than 5 cm,
Overheating and discoloration may occur if pouring more than 5cm.
so please divide your work in multiple application
or control the temperature to allow heat to escape.
[Standard Curing Time]
It is 24-48 hours based on 25℃.
Curing time may vary depending on the room temperature and humidity.
Crysin® two-part resin cures faster in high temperature and slower in high humidity.
[Second Coating Time]
6-16 hours after the first coating at 25℃.
Second coating should be applied when the surface is dry to touch.
[CRYSIN®]
Crysin® works best on completely sealed surfaces such as acrylic, glass or metal. When pouring over porous surfaces such as concrete or wood,
make sure to apply a thin coat of Crysin® as a primer.
The viscosity of Crysin® is 200cps.
Its water-like, light viscosity makes Crysin® very easy to work with,
which makes it a perfect product both for beginners and experts.
Experience a flawless resin craft with Crysin®!
Fully cured Crysin® has a hardness of Shore D 83.
The surface can be sanded or polished once cured completely.
[Characteristics of CRYSIN®]
Crystal Clear
Crysin® has excellent transparency.
It is recommended to store any unused resin away from light and air exposure
to maintain its transparency.
The recommended usage period after opening is 6 months.
UV Protection
Crysin® is UV resistant.
The special German UV blocking agent
minimizes yellowing and discoloration of the resin
and maintains the transparency for a prolonged period.
Low Viscosity
Crysin® has water-like low viscosity
and can create perfect shapes even in complex molds.
Defoamation
Crysin® has excellent defoaming and anti-foaming ability
and can achieve clean, glass-like work
without complicated defoaming processes.