CRYSIN® Flex
Soft Type Flexible 2 Part Resin
[CRYSIN® Flex] Crysin® Flex is a soft type crystal-clear two-part epoxy resin. It has low odor and zero VOC and is ideal for small projects or making flexible items. Ratio for Crysin® Flex is 2 (Resin): 1 (Hardner).
[Maximum Depth Per Pour]
The maximum depth of each application of Crysin® Flex is 5 cm.
If the temperature of working environment is over 28℃
or when working with a large project,
it is recommended to pour less than 5 cm,
Overheating and discoloration may occur if pouring more than 5cm.
so please divide your work in multiple application
or control the temperature to allow heat to escape.
[Standard Curing Time]
It is 36-48 hours based on 25℃.
Curing time may vary depending on the room temperature and humidity.
Crysin® two-part resin cures faster in high temperature and slower in high humidity.
[Second Coating Time]
6-16 hours after the first coating at 25℃.
Second Coating should be applied when the surface is dry to touch.
Crysin® Flex has hardness of Shore D 30-38 which is similar hardness of a firm leather belt when applied in thin layers and the hardness of rubber shoe sole when applied in thick layers.
[CRYSIN®]
Crysin® works best on completely sealed surfaces such as acrylic, glass or metal.
When pouring over porous surfaces such as concrete or wood,
make sure to apply a thin coat of Crysin® as a primer.
The viscosity of Crysin® is 200cps.
Its water-like, light viscosity makes Crysin® very easy to work with,
which makes it a perfect product both for beginners and experts.
Experience a flawless resin craft with Crysin®!
[CRYSIN® Characteristic]
Crystal Clear
Crysin® has excellent transparency.
It is recommended to store any unused resin away from light and air exposure
to maintain its transparency.
The recommended usage period after opening is 6 months.
UV Protection
Crysin® is UV resistant.
The special German UV blocking agent
minimizes yellowing and discoloration of the resin
and maintains the transparency for a prolonged period.
Low Viscosity
Crysin® has water-like low viscosity
and can create perfect shapes even in complex molds.
Defoamation
Crysin® has excellent defoaming and anti-foaming ability
and can achieve clean, glass-like work
without complicated defoaming processes.