CRYSIN® UV
UV/LED Curing Resin
[CRYSIN® UV] Crysin® UV is premium hybrid UV-curable resin. This multi-purpose resin is suitable for both casting (maximum depth per cure should not exceed 1cm) and doming jobs.
[CRYSIN® UV] Viscosity: Low Crysin® UV is superior in clarity and suitable for thin and delicate coats. It is easy for beginners to use and its water-like light viscosity makes it suitable to be used in a complex mold for casting work.
[CRYSIN UV® Eco Light] Viscosity: Low-Medium Its water-like light viscosity makes it suitable to be used in a complex mold for casting work. It is close to odor-free and is suitable for sensitive users. May show some yellowness immediately after curing but the clarity comes back as time lapses.
[CRYSIN® UV Eco] Viscosity: Medium Crysin® UV Eco is a multi-purpose resin, suitable for both casting and doming jobs. It is close to odor-free and is suitable for sensitive users. May show some yellowness immediately after curing but the clarity comes back as time lapses.
[CRYSIN® UV Heavy] Viscosity: High Crysin® UV Heavy is superior in clarity. It is the optimal resin for doming work as its high viscosity makes doming work and side-application easy.
[CRYSIN® UV Grande] Crysin® UV Grande [500g] is an economical product for large projects or a frequent user.
Superior in clarity where you can clearly see the writings through the resin application after curing.
Crysin® UV is curable by both UV and LED lamp.
Please check your lamp specification before working with Crysin® UV.
Optimal lamp for curing: UV 72w / LED 365nm
If the surface is tacky after curing, additional curing is recommended.
Check your surface every 20~30 seconds of curing.
If cured for too long continuously, discoloration may occur.
Crysin® UV is packaged in an easy-to-use, easy-grip container with inner safety seal to prevent leakage. Please remove the safety seal on the container before start using the product. A tip cap is packed with your resin for easy application.